Understanding the Risks

3/17/2022 (Permalink)

According to the U.S. Fire Administration, more than 2,900 home fires are started by clothes dryers each year, due largely to the buildup of lint in the dryer. This lint builds up in:

• Lint traps
• Dryer vents
• Duct work

Lint is combustible, so when it combines with heat, the stage is set for a lint fire. What is a homeowner to do?

Clean the Lint Trap

This may seem obvious, but many of us are doing it wrong. After every load, remove the lint from the screen and wipe the edges. Periodically place it in a sink of hot water and scrub with a bristle brush to get it completely clean and prevent a dryer fire.

Invest in A Brush

A dryer lint brush is a long-handled brush that will help reach the nooks and crannies. Remove your dryer lint filter, stick the brush inside and gently loosen the built-up lint. This will remove big chunks of lint that you can gather and discard. Run the dryer on air only to remove any small leftover particles.

Check Your Exhaust

Once a year, unplug your dryer and get a good look at where your exhaust vent connects. Remove that piece, reach inside and use your vent brush to get out as much lint as possible.